India’s leading Manufacturer of “World Class” Speciality Maintenance Products
General Area Corrosion Prevention
2050 Polyhyb
Hybrid, co -polymer, cross linked “liquid plastic” anti-corrosion coating
Forms a tough co -polymer plastic laminate through intermolecular cross linkages & takes a very strong bonding with clean metal surfaces. Self priming, ready to use. Fast drying. Saves application time. Superior corrosion & UV resistance
Critical Area Corrosion Prevention – Rust & Wet Areas
1040 Stangard (St) “True” Surface Tolerant Epoxy + 725 PUTC
“True surface tolerance” – excellent penetration & adhesion, even on rusty, wet, contaminated surfaces. With combination of MIO, provides an impermeable barrier. High Solids (90%). >2000 hrs Salt Spray. Good Chemical resistance. Excellent adhesion on Steel.
Critical Area Corrosion Prevention – Acid Fume Areas
1311 Stangard Corrokote (FLX)
High build – solvent free, versatile, anti – corrosion, Flexible, epoxy coating. Metal roof protection & sealing 100% solids, with chemical, corrosion & abrasion resistance, in severe industrial environments.
Critical Area Corrosion Prevention – Acid Fume Areas
Stangard #1311 Corrokote
High build – solvent free, versatile, adduct–cycloaliphatic, anti–corrosion, immersion grade epoxy lining coating. High build 360 – 400 microns in two coats.
Prevention Of Corrosion Under Insulation (CUI) & Stopping Further Pipe Deterioration
706 Stangard (ST)
Coating Of Pipe Surfaces Below Cladding – 706 Stangard (ST) heat
resistant – surface tolerant, MIO- metallic zinc fortified cathodic cum barrier protection.
A unique solution to protect metal pipelines operating at high temperature (Upto 180°C continuous & 220°C intermittent) from corrosion under insulation. Excellent adhesion >1000Psi on ST2/ST3. Unique combination of atomized zinc(2-5 microns) + effective particle size MIO, provides long term cathodic as well as barrier protection.
High Heat Coating 1 K Paints – Furnace External Coating
Z979 HHC High Heat Coating
Single component silicone resin based, aluminum heat resistant coating. Excellent high temperature & thermal cycling resistance. Durable, Superior weathering resistance. Meets IS specifcation 13183/1991. Available two grades HHC (300) & HHC (600). Best in class performance.
Protecting Concrete Floors Against Damage Due To Oil Soaking, Acid Spillage
754 Stangard Sealer
Based on unique moisture curing urethane technology. State of art “MCU” technology based 754 concrete sealer penetrates deeply into contaminated concrete, bonds strongly, seals & protects concrete floors /walls, against spillages & seepages.
Protecting Concrete Floors Against Damage Due To Oil Soaking, Acid Spillage
Stangard #4029 NOVOLAC
High build, solvent free, chemical, solvent, acid, alkali… resistant, severe service, epoxy coating.
Outstanding resistance to both concentrated mineral acids (98% Sulfuric, 33% Hydrochloric, Aqua Regia…) as well as organic acids (Acetic acid, Fatty acids…) and also concentrated oxidizing acids (50% Nitric acid, 10% Hydrouoric Acid…).
Preventing Bus Bar Insulation Failures & Insulator Tracking / Flashovers – 400V To 33000V
Z906 Provar Anti Track
High di-electric strength anti-tracking & insulation coating.
Single component air drying “class H” epoxy insulation aerosol spray coating. Tough, glossy epoxy coating, Especially useful for preventing insulator tracking & upgrading “IR” values. Air dries in 15 minutes, hardens in 1 hour. Adheres strongly and forms a tough glossy coating. High electric strength – 121 KV / mm at 28°C & 81KV /mm at 180°C. Excellent adhesion and high arc resistance.
Prevention of Accidents Caused by Electrical Leakages from High Voltage Panels
Stangard 1311 Insulkote (Class A)
High build – high breakdown voltage solvent free, dielectric flooring, meeting requirements of Class A as per IS 15652:2006.
Unique breakdown voltage (Tested ERDA, Vadodara): In Air 34.1 Kv. (4 Coat application – 1000 /1200 Microns DFT) 1 Coat of 1311
INSULKOTE TOP COAT – GREEN 100-120 microns). A self–leveling solvent free, high build-high breakdown voltage, protection & insulation coating, developed from an unique cycloaliphatic amine curative, designed to provide insulation safety flooring.
Prevention of Accidents Caused by Electrical Leakages from High Voltage Panels
Stangard 1311 Insulkote (Class B)
High build – high breakdown voltage, solventfree, dielectric flooring, meeting requirements of Class B as per IS 15652:2006 .
Unique breakdown voltage (Tested ERDA, Vadodara): In Air 53 Kv. (4 Coats of STANGARD 1311 INSULKOTE CLASS B 1800–2000 Microns & 1 Coat of 1311
INSULKOTE TOP COAT – GREEN 100-120 microns). A self–leveling solvent free, high build-high breakdown voltage, protection & insulation coating, developed from an unique cycloaliphatic amine curative, designed to provide insulation safety flooring.
Preventing Industrial Fires : Safety Of Men & Material – Cable Fire Suppression Coatings
Firex EC 43
Water immersion /weather resistant intumescent restop cable coating for combustible electrical & communication cables.
Cable fire suppression coatings, ideally should provide the following two key protections: Prevention of fire propagation on cables : (Governing international test standard – IEC 60332-3-21, IEEE 383 & FM 3971) Protection of cables against direct fire exposure : (Governing international test standard – IEC 60331-11) It uniquely provides the longest time span fire protection- , in the world, at fire temp. of >1100ºC. circuit integrity (Most cable coatings provide either only one of these protections, or only for a minimum time interval of 2-5 minutes, against 750ºC fire).
Aerosol – Cleaners & Degreasers
Z939 Bearing Solvent – Non Flammable
Non-flammable, rapid drying degreasing formulation with powerful flushing action. Cleans instantly, leaving sparkling metal surfaces for quick & efficient cleaning of grease, grime, dirt, tar, wax, old grease residues & other such contaminants.
Aerosol – Cleaners & Degreasers
6030 Pen Oil
Industrial grade heavy duty penetrating oil meeting US FED spec. No. VVP 216a. #6030 Pen oil loosens rust and corrosion formed by alkali, acids, water, and electrolysis. Low surface tension allows the oil to migrate into tight spaces and along threaded fasteners. Reduces the tugging and pounding required to loosen screws and bolts. Loosens tar, dirt, and carbon on stubborn, rusted bolts.
Bulk – Cleaners & Degreasers
Z111 AC 500 (Dip Grade)
Highly effective rust & scale remover blend of Tamed phosphoric acid & detergents.
Bulk – Cleaners & Degreasers
Z111 AC 500 (Gel Grade)
Heavy duty gel type, non fuming rust remover with inhibition mechanism. Removes rust, oxidation stains, scale & light oil from steel, concrete, ceramic tile & painted Surfaces
Bulk – Cleaners & Degreasers
Z112 Acidifoam
Foaming complexed mineral acid cleaner based on tamed metal safe acids. Removes scale, rust & even many acid susceptible soils found in industrial & institutional environment. Faster acting & more aggressive than phosphoric acid.
Bulk – Cleaners & Degreasers
Z118 EQC 10
Ultra strong complexed liquid acid scale Remover formulated for the fast, Effective removal of Hardness scale, rust & mineral deposits.
Bulk – Cleaners & Degreasers
Z109 Neugenic 4175
Heavy duty cleaner for Removing solidified oil, grease, tar, adhesives, asphalt, Cardium compounds…
Zinc Based Anti-corrosion Aerosols
7007 Cold Galvanizing Compound
A quick drying, matte-grey, sacrificial coating which offers excellent long term cathodic corrosion protection for metals. It contains 95% zinc in the dry film and provides cathodic protection to ferrous metals.
Z201 pufseal (1K-S)
Self-expanding CFC free, one component polyurethane foam sealant.
Z2206 360 Puf 3X
Multi-position “360 Spray Action” CFC Free one component polyurethane foam sealant.
General Maintenance – Products
Teflox (HD) – Teflon Thread Sealing Paste
Teflon based thread sealing paste. Provides positive sealing on all types of threaded joints in both metallic & plastic lines, handling water, steam, oils, fuel, LPG & other services. Non-toxic paste is a blend of microrefined Teflon particles in a non-melting grease base. Does not contain any toxic/ environmentally hazardous material such as lead, sulphur…
General Maintenance – Products
8078 Dry Graphite Lube
Clean, dry, non-oily, non-staining, graphite lubricant, for use where petroleum products are avoided. Highly effective in a wide temperature range of – 100F to + 1000F. Prevents the buildup of dirt and grime.
General Maintenance – Products
8079 Drive Belt Dressing – belt Preservative
8079 drive belt dressing prevents belt slippage and glazing of all types of industrial belts.
General Maintenance – Products
SP98L8 Teflon Gel
High tack penetrative teflon lubricant penetrates as an oil…then sets up to a tacky grease-like gel. High tack resists water washout, protects against rust and corrosion.
General Maintenance – Products
7045 Heavy Duty Open Gear & Wire Rope Lube
A tough and pliable lubricant with extra adhesion properties. Reduces wear and noise, waterproofs, and penetrates deep into metal pores for complete lubrication. Protects against rust and corrosion, in both indoor and outdoor environments.
Electrical Maintenance – Products
6084 Red Insulating Varnish
Class F, flexible, tough, high dielectric strength arc & tracking resistant finishing electrical varnish. Penetrates, coats, insulates & seals in one step. Restores “IR” values, “in-situ” allowing motor operation till a suitable shutdown.
Electrical Maintenance – Products
# Z931 Strippex (Synthetic Rubber Coating Series)
Unique air dry, dielectric, non ageing, single component, Synthetic rubber coating for tight, conformal electrical insulation, weather proofing & Color coding. Excellent weatherability, chemical resistance & mechanical strength.
Electrical Maintenance – Products
6004 Kleer Kote
Fast drying, transparent acrylic plastic protective coating. Resistant to heat, cold, salts, alkalies & acids. Will not crack, peel or discolor. Solder through
Electrical Maintenance – Products
8480 Carbon Cleaner
Foam gel type heavy duty, “thick-film” penetrative bonded deposit remover especially suitable for thick layers. Especially useful for DC motor commutator cleaning, Post flash over carbon cleaning….
Electrical Maintenance – Products
8078 DGCS Dry Graphite Conductive Sealant
Pure, fully dry graphite coating designed to prevent bi-metallic
corrosion, improve low conductivity & prevent arcing, overheating, jamming…. In 11 KV & higher voltage systems
Electrical Maintenance – Products
6006 Battery Terminal Coating (Waxy Film)
Air tight, water proof & acid resistant waxy coating that prevents sulfation & corrosion on battery terminals,.
Special Lubricants
TTF 1000 / Stenterlube 220
Heavy duty synthetic high temperature chain oil. High VI – long life. Ultra low carbon residue. Ultra high wear protection. Operating temperature range: -29°C to +250°C.
Special Lubricants
Supergaurd 320
Heavy duty high temp chain oil specially designed for elevated temperature upto 300°C. Protects chains & conveyors from wear. Improves efficiency of chains thus reduce the maintenance cost. Doesn’t form carbon residue or vanishes. Keep chains & conveyors clean.
Special Lubricants
60424 CG Super Conduct 32
Electrically conductive synthetic grease. Prevents voltage drops & severe arcing in high voltage contacts & joints. Thermally stable. Prevents wear & corrosion. Chemically inert, Non corrosive. Operating temperature range: -20°C to +300°C.
Special Lubricants
90240 Copper Plus
Copper based metallic antiseize paste with OMC anti friction Technology. Prevents corrosion & seizing. Totally resistant to fresh & salt water. Free of lead & lead compounds.
Special Lubricants
70202 Super Wire Rope
Semi – fluid MoS wire rope grease. Excellent load bearing, anti – wear corrosion & water repelling properties. Fast wetting action – penetrates deeply into wire rope strands & protects. Tough outer film protects ropes & sheaves. Excellent rust preventive properties. Solid lubricant additive including moly, enhance film strength.
Protecting Heat Exchangers & Pumps Against Wear & Corrosion –
Ceramic Coatings & Putties For Prevention Of Abrasion, Erosion & Corrosion
1170 Stangard Ceramic-metal Rebuild Putty
High performance ceramic-silicon steel alloy filled epoxy system, for rebuilding metals damaged by abrasion-erosion-corrosion.
Protecting Heat Exchangers & Pumps Against Wear & Corrosion –
Ceramic Coatings & Putties For Prevention Of Abrasion, Erosion & Corrosion
1180 Stangard Ceramic Metal Surfacing Coating
To be over coated with 1180 Stangard Ceramic Metal Surfacing Coating or 1190 Stangard Ceramic- Metal Ultra Flow self leveling coating, according to the applications.
Protecting Heat Exchangers & Pumps Against Wear & Corrosion – Ceramic Coatings & Putties For Prevention Of Abrasion, Erosion & Corrosion
731 Stangard – ER “Xtream”
Modified ceramic -zirconium epoxy putty, filled with special fibers and fine ceramic -zirconium beads for protecting processing equipments from fine particle abrasion & erosion.
Cold Repair System – Metal Rebuilding Putties
815 Stangard Steel Putty (SPL)
Multi-purpose steel alloy filled epoxy system for metal repair with unique balance of high tensile Strength & impact resistance.
Cold Repair System – Metal Rebuilding Putties
Z821 Titanium Steel Putty
Solvent free, ultra high strength, titanium steel filled epoxy putty. Especially suitable for Repairs which require high compressive strength and extreme chemical resistance.
